- All
- Obsidian
- NETRON
- Network Switches
- EtherDMX Nodes
- RDM Splitters
- DMX Splitters
- Accessories
- ONYX
- Consoles
- Wings
- USB Interfaces
- Uncategorized
- Three Phase Distribution
- Single Phase Distribution
- Stage Box
- Patch Bays
- Mains Cabling
- PowerLock
- Three Phase Cables
- Single Phase Cables
- Multipin Cables
- 6 pole Wieland
- 10 pole Wieland
- 19 pole Socapex
- Hybrid Cabling
- Signal Cabling
- DMX Cables
- Microphone Cables
- Speaker Cabling
- Video Cabling
- Parts
- Bulk Cable
- Power
- Connectors
- CAT5/6
- Jacks
- Power
- Speaker
- XLR
NETRON DMX10-5
The DMX10-5 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 5pin XLR DMX outputs. Utilising long life toggle switches every port is routed to either the A or B input, providing flexibility to accommodate any situation. The NETRON DMX10 is made from a rugged metal chassis featuring impact resistant paint and a lightweight yet solid construction. The DMX10 is ideally suited for installations and touring applications that do not require RDM communication and is available in 5 and 3pin XLR configurations.
Ω Dual A/B 5pin XLR DMX Input
Ω 10 isolated 5pin XLR DMX Outputs
Ω A/B routing per output port
Ω LED feedback for In/Out/A/B/Power
Ω Industrial strength powder-coated finish
Ω Lightweight and rugged rackmount housing2U PDU; 6chnl; PowerCON
Ω 4pole 32A MCB Mains Isolator
Ω 7x 16A / 30mA Type A RCBO
Ω 6x PowerCON
Ω 1x PowerCON (courtesy)
Ω 2m 5core 6mm² RV-K High Flex Supply Cable
Ω 32A 56 Series or CeeForm Plug
Ω Low profile 19″ 2RU 150mm Zinc Anneal chassis finished in hard wearing textured powder coat
Ω Indelible colour markings for easy identification
Ω Full Quality Control with component Serial Number trackingPDU; 6chnl TrueCON & GPO for Audio Technik
OmegaTech PDUv3 custom built 3Ø Power Distribution Unit for Audio Technik: 32A 4 pole MCB Mains, 32A 4 pole RCBO, 6x 16A RCBO on rear panel; 18x TrueCON & 6x 15A GPO w/ neon per connector on front panel; 32A CeeForm Input & Loop Out Connectors on rear panel; Anti Tamper Hood over MCB/RCBO. 3RU 420mm deep chassis.
NETRON BS10
The NETRON BS10 is an elegant wall station for cue or preset recall from the EN12i EtherDMX Node.
10 Backlit and numbered buttons provide easy feedback, and the RJ45 connection combines power and data for simple and efficient connectivity to the NETRON node over standard CAT5 wiring.
Ω 10 Button Remote for EN12i
Ω 10 Red / Blue Backlit Buttons
Ω Cue or Preset Recall
Ω US or EU Cover PlatePowered Stage Box for UPS w/ TrueCON Input, PowerCON Thru, GPO Output
OmegaTech Powered Stage Box; Dual Channel for UPS; 2x TrueCON Input; 2x PowerCON Output; 6x 10A GPO Connectors; 2x 10A Double Pole Hydralic Magnetic Circuit Breaker w/ Red & Green Illuminated Rocker; 2x M10 Rigging Points & 4x safety chain points; large non slip rubber feet
NETRON RDM6D
The Netron RDM6D is a powerful DIN Rail or Wall Mount DMX/RDM splitter with six wire terminal or RJ45 outputs.
Designed with rugged, opto-isolated outputs it is the ideal device for permanent installations requiring a compact design and flexible wiring options.
The innovate connector configurations allow the NETRON RDM6D to be configured with RJ45, screw-terminals or IDC (Insulation displacement connectors). All options are included through exchangeable plates, which can be installed on the top /bottom or front of the RDM6D, depending on installer preference or space considerations.Additionally, the DIN Rail brackets can be exchanged with wall mount brackets for an alternative mounting option. The NETRON RDM6D can be powered by with a wide range DC Input from 9-48V. The NETRON RDM6D is UL924 compliant with a dedicated emergency cue, wet or dry contact closure and a prominent test button with integrated LED feedback. The device allows to record a custom cue or set all DMX channels to 100%. Emergency off timeout can be customized and individual channels excluded from the emergency cue.
Ω RJ45, screw terminal or IDC connectivity
Ω Configurable Top, Bottom and Front ports
Ω DMX, RDM support
Ω POE or 9-48V DC power
Ω Emergency Cue System with test button and contact closure
Ω Powder-coated aluminum DIN Rail housingNeutrik XLR 3pin Male Cable Connector with Nickel Housing
Features & Benefits
- Male connector with improved locking recess without “window”, more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design – valuable and handy
- Rugged zinc diecast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
