- All
- Obsidian
- NETRON
- Network Switches
- EtherDMX Nodes
- RDM Splitters
- DMX Splitters
- Accessories
- ONYX
- Consoles
- Wings
- USB Interfaces
- Uncategorized
- Three Phase Distribution
- Single Phase Distribution
- Stage Box
- Patch Bays
- Mains Cabling
- PowerLock
- Three Phase Cables
- Single Phase Cables
- Multipin Cables
- 6 pole Wieland
- 10 pole Wieland
- 19 pole Socapex
- Hybrid Cabling
- Signal Cabling
- DMX Cables
- Microphone Cables
- Speaker Cabling
- Video Cabling
- Parts
- Bulk Cable
- Power
- Connectors
- CAT5/6
- Jacks
- Power
- Speaker
- XLR
NETRON EN12
The Netron EN12 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal device for live production or installations requiring a lot of physical DMX ports. Contact closures allow for recall of presets, routings, mergers or any of the internal cues.
Ω RDM, Art-Net and sACN support
Ω Factory and user presets for plug and play setups
Ω Line Voltage or PoE powered
Ω 1.8” OLED Display with rotary knob
Ω 99 Internal cues with fade and delay time
Ω Customizable routing and merging options
Ω Remote configuration via internal webpage
Ω Contact closures for cue or preset recall
Ω Powder-coated aluminum rackmount housing
Ω Unlocks ONYX NOVA 4 Universe License
Ω NETRON CLU for remote configuration and firmware updatesHybrid Cable, Piggyback to TrueCON & 5pin XLR, 0.5m Fans, 8m
OmegaTech 8m Hybrid Cable; PDL Piggyback & 5pin XLR to Neutrik / Amphenol TrueCON 16A & 5pin XLR; 3core 1.5mm² in a separate jacket + 1x digital audio pair in overall jacket; 14.9mm OD; 500mm tails with polyester braid, moulded cable breakout boot; Velcro cable wrap, clear heat shrink, clearly labelled with length & serial number
2U PDU; 6chnl; PowerCON
Ω 4pole 32A MCB Mains Isolator
Ω 7x 16A / 30mA Type A RCBO
Ω 6x PowerCON
Ω 1x PowerCON (courtesy)
Ω 2m 5core 6mm² RV-K High Flex Supply Cable
Ω 32A 56 Series or CeeForm Plug
Ω Low profile 19″ 2RU 150mm Zinc Anneal chassis finished in hard wearing textured powder coat
Ω Indelible colour markings for easy identification
Ω Full Quality Control with component Serial Number trackingNETRON RDM6D
The Netron RDM6D is a powerful DIN Rail or Wall Mount DMX/RDM splitter with six wire terminal or RJ45 outputs.
Designed with rugged, opto-isolated outputs it is the ideal device for permanent installations requiring a compact design and flexible wiring options.
The innovate connector configurations allow the NETRON RDM6D to be configured with RJ45, screw-terminals or IDC (Insulation displacement connectors). All options are included through exchangeable plates, which can be installed on the top /bottom or front of the RDM6D, depending on installer preference or space considerations.Additionally, the DIN Rail brackets can be exchanged with wall mount brackets for an alternative mounting option. The NETRON RDM6D can be powered by with a wide range DC Input from 9-48V. The NETRON RDM6D is UL924 compliant with a dedicated emergency cue, wet or dry contact closure and a prominent test button with integrated LED feedback. The device allows to record a custom cue or set all DMX channels to 100%. Emergency off timeout can be customized and individual channels excluded from the emergency cue.
Ω RJ45, screw terminal or IDC connectivity
Ω Configurable Top, Bottom and Front ports
Ω DMX, RDM support
Ω POE or 9-48V DC power
Ω Emergency Cue System with test button and contact closure
Ω Powder-coated aluminum DIN Rail housingOmegaTech 2U Power Rack Strip, PowerCON & GPO; Rear Input
OmegaTech Premium Power Rack Strip; 2RU x 150mm deep w/ adjustable rack ears; Front: 2x 10A GPO, 3x PowerCON Out; Rear: PowerCON In / Out, 8x 10A GPO; 10A Double Pole Hydraulic Magnetic Circuit Breaker; Integrated 100W USB-PD Charger; Dimmerable 12VDC Desk Lamp Outlet
