2U PDU; 6chnl; PowerCON
Ω 4pole 32A MCB Mains Isolator
Ω 7x 16A / 30mA Type A RCBO
Ω 6x PowerCON
Ω 1x PowerCON (courtesy)
Ω 2m 5core 6mm² RV-K High Flex Supply Cable
Ω 32A 56 Series or CeeForm Plug
Ω Low profile 19″ 2RU 150mm Zinc Anneal chassis finished in hard wearing textured powder coat
Ω Indelible colour markings for easy identification
Ω Full Quality Control with component Serial Number trackingONYX NX Sync
The NX SYNC captures timecode in various SMPTE formats from its 3-pin XLR connection and converts it to a MIDI Timecode (MTC) stream, where it can be read into ONYX or any other MIDI Timecode compatible software. Additionally, it also has the power to take MTC and send it back out as SMPTE.
The NX SYNC contains a powerful hardware architecture for instant processing and minimal frame delays. It allows the ONYX software to read Linear Timecode (LTC) signals for perfect cue synchronization with external devices like sound or video playback systems.
The NX SYNC does not require custom drivers, and in addition to working with ONYX, it can be used as a SMPTE to MTC/ MTC to SMPTE device for both Windows 10 and MAC OS software applications.
Ω Two 3-pin XLR connectors for LTC Timecode In/Out
Ω SMPTE Timecode @ 24, 25, 29.97 and 30 frames per second
Ω Native Plug-and-Play USB Connection for ONYX, PC and MAC (no custom drivers required)
Ω USB Powered
Ω Convenient, space-saving, stackable design
Ω Rugged impact-resistant housingPDU; 12chnl PowerCON; Monitoring
Ω 32A MCB Mains Isolator
Ω 12x 16A / 30mA Type A RCBO
Ω 12x PowerCON
Ω 2m 5core 6mm² RV-K High Flex Supply Cable
Ω Optional 3Ø loop out Tail
Ω 32A 56 Series or CeeForm Plug (& Socket)
Ω 19″ 3RU 300mm 1.2mm / 2.0mm Zinc Anneal finished in hard wearing textured powder coat
Ω Indelible colour markings for easy identification
Ω Full Quality Control with component Serial Number trackingONYX NX1 Console
The NX1 is the essential lighting controller in the innovative and powerful ONYX platform. Fully featured and unrestricted if offers the complete ONYX experience without compromises in an ultra-compact package.
Utilising the full ONYX Operating System the NX1 includes a high-brightness 10.1″ HD multi-touch screen; 4 assignable parameter encoders; 10 full motorized playbacks with four freely assignable buttons plus and extra playback and function key hybrid array. A dedicated Master Go section rounds out the efficient front panel design.Including the latest in industrial components the NX1 contains a powerful new Intel processor, high speed NVMe SSD drive and 8GB of DDR4 RAM, allowing fast boot times, instant operation and the ability to process 8 Universes right inside the console. With four DMX ports, a Gigabit network port for up to 8 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 1 has ample connectivity and power for a wide variety of shows and applications. One additional touch monitor is supported for even more direct access at anytime.
The NX1 is further expandable with the dedicated NXK keypad and the NXP motorized playback wing. A simple magnetic alignment system allows attachment on either side of the NX1. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.

















