19pole Socapex Looms – Black

Light Duty 4core SpeakON Cable

OmegaTech 1.5m 3pin Female to 5pin Male XLR Adapter; Premium Double Shielded AES/EBU/DMX Cable; Neutrik XLR Connectors w/ choice of coloured boots; Velcro cable wrap, clear heat shrink, clearly labelled with length & serial number

OmegaTech 5m 125A 3Ø Heavy Duty Extension Cable; CeeForm 5pin 125A Plug and Socket; 5core 50mm² H07RN Rubber, Cam Buckle wrap, clear heat shrink, clearly labelled with length & serial number

RS2 UPS Changeover – TrueCON

Ω   32A MCB Mains Isolator
Ω   12x 16A / 30mA Type A RCBO
Ω   2x Socapex Connectors
Ω   1x 10A / 30mA Type A RCBO
Ω   1x 10A Australian GPO Connectors
Ω   2m 5core 6mm² RV-K High Flex Supply Cable
Ω   32A 56 Series or CeeForm Plug
Ω   19″ 3RU 300mm 1.2mm / 2.0mm Zinc Anneal finished in hard wearing textured powder coat
Ω   Indelible colour markings for easy identification
Ω   Full Quality Control with component Serial Number tracking

The Netron RDM6D is a powerful DIN Rail or Wall Mount DMX/RDM splitter with six wire terminal or RJ45 outputs.

Designed with rugged, opto-isolated outputs it is the ideal device for permanent installations requiring a compact design and flexible wiring options.
The innovate connector configurations allow the NETRON RDM6D to be configured with RJ45, screw-terminals or IDC (Insulation displacement connectors). All options are included through exchangeable plates, which can be installed on the top /bottom or front of the RDM6D, depending on installer preference or space considerations.

Additionally, the DIN Rail brackets can be exchanged with wall mount brackets for an alternative mounting option. The NETRON RDM6D can be powered by with a wide range DC Input from 9-48V. The NETRON RDM6D is UL924 compliant with a dedicated emergency cue, wet or dry contact closure and a prominent test button with integrated LED feedback. The device allows to record a custom cue or set all DMX channels to 100%. Emergency off timeout can be customized and individual channels excluded from the emergency cue.

Ω   RJ45, screw terminal or IDC connectivity
Ω   Configurable Top, Bottom and Front ports
Ω   DMX, RDM support
Ω   POE or 9-48V DC power
Ω   Emergency Cue System with test button and contact closure
Ω   Powder-coated aluminum DIN Rail housing

OmegaTech Set of 5x 1.5m 500A Light Duty PowerLock Drain Tails (suit Distribution board or Applicance); 500A Powerlock Connector to Lugs, 35mm² Flexible HF Black Sheath 110°C, clear heat shrink, clearly labelled with length & serial number

Light Duty 2core SpeakON Cable

The NX1 is the essential lighting controller in the innovative and powerful ONYX platform. Fully featured and unrestricted if offers the complete ONYX experience without compromises in an ultra-compact package.

Utilising the full ONYX Operating System the NX1 includes a high-brightness 10.1″ HD multi-touch screen; 4 assignable parameter encoders; 10 full motorized playbacks with four freely assignable buttons plus and extra playback and function key hybrid array. A dedicated Master Go section rounds out the efficient front panel design.Including the latest in industrial components the NX1 contains a powerful new Intel processor, high speed NVMe SSD drive and 8GB of DDR4 RAM, allowing fast boot times, instant operation and the ability to process 8 Universes right inside the console. With four DMX ports, a Gigabit network port for up to 8 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 1 has ample connectivity and power for a wide variety of shows and applications. One additional touch monitor is supported for even more direct access at anytime.

The NX1 is further expandable with the dedicated NXK keypad and the NXP motorized playback wing. A simple magnetic alignment system allows attachment on either side of the NX1. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.